One of our clients recently mentioned that she had a water leak. It started in her bathroom but ended up causing a huge damp spot on her dining room ceiling. She has a tile shower and somehow a leak developed. To spare all of you the same headache, here is some information to prevent this from happening to you.
If you have tile shower walls, there is a very good possibility that a leak could develop between the tile and the tub. As your house moves (a natural process that occurs in every home), a hairline crack can occur that allows water to get into the joint. Once water gets in, there is no telling how much damage can be done.
Caulking between your shower walls and tub prevents leaks and reduces mildew buildup. Removing old caulk and recaulking joints between tiles and your tub is an annual bathroom maintenance job. You heard that right – it is an annual job.
There’s another good reason to recaulk. If you’ve tried to remove the black mildew stains from caulk, you know the blemishes are often stubborn and unyielding. That’s because the stains are often behind the caulk, between the caulk and the wall. The answer, of course, is to remove the caulk, kill the mildew, and then replace the caulk.
Removing the caulk isn’t as hard as it appears. There are commercial products that can assist you with the job. These products are specially formulated to soften caulk for easy removal. After the caulk has softened, remove it with a putty knife. Clean the joint area with paint thinner and then wipe it down with a clean cloth. Kill mildew with a mixture of bleach, water and powdered laundry detergent. (NEVER use any detergent that contains ammonia with bleach as this can create a dangerous gas). Place these ingredients in a spray bottle and shake well. Spray the affected areas and then rinse well with water. Use your blow dryer to dry the area. Now you are ready to reapply some caulk.
Apply tub and tile caulk into the joint and smooth it with your finger, an old teaspoon, or a caulking spreader. Immediately remove the tape by pulling it out and away from the freshly caulked joint. Be careful not to touch the caulk. Let it dry. If you don’t want to take the risk and try this on your own, definitely ask a professional.
Not only will your shower look better, but you are also preventing leaks and future water damage.
Tags: avoid water damage, Bathroom, caulking, Grout, hints and tips, maintaining the bathroom, prevent leaks, shower, shower caulking, shower maintenance, shower solutions, tile, tile shower, water damage
Trackback from your site.